× Scuba Classes
Terms of use Privacy Policy

Choosing the right dive regulator



ssi scuba

A regulator is used to control the breathing gas pressure for divers. While this is most commonly the case, a regulator can also control pressures for other gases used during diving. An alternate second stage can be called a dive regulator. The regulator's cylinder is attached to the tank. It allows the diver's to breathe underwater.

Scuba regulators

A scuba regulator is an integral part of any scuba diving system. They regulate how much air is delivered to the diver to allow them to breathe easily and comfortably. They can also stop or start air delivery below water. A purge button on the regulator allows the diver to empty the water chamber and let out a stream of oxygen if necessary.


certification for scuba diving

Alternate stage

The primary stage and the second stage are the two main parts of a regulator for divers. The primary stage supplies air to the diver. The secondary stage replenishes the air. The alternate stage can be either a cheaper or lower-performing model. It serves the same purpose but is not quite as effective.

Balanced regulator

The Balanced diving regulator is versatile and efficient. It provides breathing gas to the diver at minimal effort. Its advanced design and high quality materials make it an excellent choice for any diving environment.


DIN valves

The type of valve is an important feature to consider when choosing a dive regulator. Typically, you will find two different types: Yoke valves and DIN valves. An O-ring for a Yoke valve fits into the threaded connection of the tank's valve. A DIN valve, on the other hand, has an o-ring that fits into a threaded connection on the regulator's first stage.

Swivel joint hose adaptor

Divers have a variety of accessories, including a swivel hose adaptor that fits into a regulator. This adaptor allows you to route your regulator hose in a natural way and reduces jaw stress. This accessory allows you to share your air with your buddy. These accessories are simple to use and should be washed after each dive.


key west scuba diving reviews

Regulators with environmental seals

There are many options for environmentally sealed dive regulators. These devices are great for anyone who is able to dive in cold water. Among them is their corrosion-resistant design, which can be achieved by using zirconium over brass. Many of these products come with an environmentally sealed seal from the factory and a large push button to purge. Some come with a limited life warranty.



 



Choosing the right dive regulator