The term wreck diver is typically associated with recreational diving, and exploring shipwrecks. While shipwrecks are the traditional sites for wreck diving, an increasing trend is to scuttle retired ships to create artificial reef sites. For more information on wreck diving, please read the following. Here are some key tips to help get you started. First, get your equipment ready! There are many kinds of equipment. The right equipment can make the difference between a safe and dangerous dive.
Non-penetration wreck diving
If you are new to scuba diving and would like to try non-penetration wreck diving, then there are a few things you need to know. First, wrecks are often places to fish. Divers need to be aware if there are lines or nets. You should also be aware that the terrain underneath can have sharp edges. The currents can carry divers away from what they are looking for. This type of terrain is dangerous and it's best to avoid wreck diving.
Although technical penetration diving sounds easier than it actually is, there are many dangers involved. You could be trapped in narrow passageways or face overhead hazards when diving in the "light zone". Silt and mud can cause visibility problems and make orientation extremely difficult. Non-penetration wreck diving is best. Divers should stay in the light zone and then move to an exit point.
A sunken wreck is surveyed
Surveying a sunken ship requires more than traditional surveys. You also need to have a good understanding of the maritime history and specific equipment. The survey method used depends on how accurate and time-consuming it is. It may include a GPS position fix or a tape baseline. Or offset and ties measurements. Several techniques are available for surveying a sunken wreck, including sonar and other non-destructive methods.
A shipwreck survey aims to identify the vessel as well as its location. It should also include information about navigational hazards and environmental conditions. The survey report should include a description of the vessel's structures, the incident that resulted in its sinking, and any other archeological studies. It should also be possible to plot the location on a nautical map in order to take precise measurements.
Equipment needed
Knowing the basics of a shipwreck is essential before you dive into it. You should be familiar with the shipwreck's layout, key points, and hazards. These things will help you prepare for your dive, and reduce the chance of an accident. You'll find information about all the equipment required to dive a shipwreck. Before diving, make sure you read the checklist and bring it along to the dive site.
Proper buoyancy control can prevent you from losing your way in dark waters. For wreck diving, you need to have good buoyancy control. It's not recommended to dive in deep water without a buoyancy control tank and a weight belt. If you are looking for a great dive, a weight belt is essential. These two pieces ensure safety for you and your fellow divers.